Free Essays on Length to Get Inspired & Learn by Example

Introduction

In this paper we will show basics of use of Mintab 16 statistical software related to a real world problem. As it mentioned in the case study, “fine dusts formed during production activities are a potential health hazard for those who are working in brick, tile, porcelain and crystal glass manufacturing. One of the reasons for this is that the smallest particles in fine dusts may contain Respirable crystalline silica formed from the quartz component of the raw materials.”
In this case we are given with a data set of workers in brick, tile, porcelain and crystal glass manufacturing . Continue reading...

(Course name and code)
(Insert date of submission)
1.0 Abstract
The report is divided into two major sections. The first section of the report deals with a discussion about fundamental physical quantities together with their SI units. The quantities highlighted in the report include Mass, length, time, temperature and plane angle. A discussion of the derived physical quantities together with their units has also been presented in clear detail. The second part of the report focuses on providing a discussion of two machines that apply thermodynamics and are used in oil and gas industry. The machines identified to apply Continue reading...

REPORT

Reg.No.

Introduction

The experimental objective for Lab 6: Acceleration Due to Gravity, was to find a precise value for the acceleration due to gravity using the method of free fall and the swinging pendulum method. For part A of the lab, a steel ball was dropped from an electromagnet landing on a reaction pad. While falling, a photogate was placed at certain heights recording the time over a distance in seconds and meters. The photogate measured the time from when the ball passed the photogate to when the ball landed on the reaction pad. For any free falling object, mass Continue reading...

Interpreting Logistic Regression Output from Excel

Interpreting Logistic Regression Output from Excel

Introduction

When we have a binary output variable Y, and we wish to model the conditional probability of (Y, given X) as a function of X, one approach is to perform logistic regression. Logistic regression introduces the ‘logistic transformation’, log p (x)/(1-p (x). This logistic transformation helps in avoiding results that would not normally make sense. Using this approach, logistic regression helps to determine the probability of a categorical dependent variable based on one or more predictor variables (Carnegie Mellon University, n.d.).
The challenge is to convert this data to a prediction Continue reading...

ID Number

ABSTRACT

Continuum mechanics is a combination of physical laws and mathematics that estimate the behavior of matter that is prone to mechanical loading. The basic equations involved in continuum mechanics may be formed in two distinct but fundamentally parallel formulations. In continuum mechanics, deformation is the transformation of certain bodies or objects from a reference shape to a present shape. This paper explores the different types of deformation in continuum mechanics.

Keyword: continuum mechanics, deformation, stretch, rotation, strain, physics laws, mathematics

INTRODUCTION
The examination of the mechanical and kinematic characteristic of materials demonstrated on the continuum postulation is termed as continuum mechanics. Continuum mechanics is divided into two Continue reading...

GROWTH AND BRANCHING OF A GARDEN ROSE

The Effect of Mechanical Stimulation on the Growth and Branching of a Garden Rose
In an effort to shape a potted plant to the required shape, it is necessary to control the branching and compact growth. Use of chemical regulators is common, but concerns about the health of the plant and of the environment prompt research into other areas. Research into the application of mechanical stimulation offers a potential alternative.
The experiment used the breed Rosa Hybrida ‘Radrazz’ Knock-out. Two frequencies were applied to young plants in two separate increments. The horizontal bar applying the frequencies passed back and Continue reading...

Introduction

One of the systems of the body is the muscular system which is has a specific function of either contracting or shortening (Seeley et al 2008). The muscular system has three types namely the skeletal, cardiac, and smooth muscle. Skeletal muscle is a type of muscle tissue that allows movement of the body. Muscle contraction is defined as the process where in muscle fibers produce tension or action potential frequency when there is an interaction among different contractile proteins or sliding of actin over myosin myofilaments which is controlled by the nervous system. Action potential frequency is defined as Continue reading...

INTRODUCTION

This write up gives details about implementation techniques that have been adopted by CPU manufacturers to improve the speed of information processing of CPU especially with the use of techniques as pipelining and the implementation of Reduced Instruction Set Computers (RISC) architecture. Most of the high performance computers make use of these techniques in some form. The details of the RISC architecture where fewer machine language instructions are used, and all instruction formats are kept of the same length in order to simplify the fetching and decoding process of instructions.

The history of the RISC architecture can be traced Continue reading...

Literature Review

Abstract
Why
The genetic basis of dog coat growth pattern, length, and curl is not as well-characterized as coat color.
What/How
Genome-wide association studies (GWAS) were performed on >1000 domestic dogs from 108 breeds to determine which genes direct or influence dog fur phenotypes.

Major Results

Distinct mutations in three genes (RSPO2, FGF5, and KRT71) were identified to have combinatorial effects on coat phenotypes in purebred dogs in the US.

Concise

The abstract contained all necessary information without being lengthy. Scientific jargon was kept to a minimum: enough to be understood by readers with sufficient knowledge on the topic but without Continue reading...

Abstract

A variety of paper aero plane models which are applied to simulate the behaviours of airplanes. From the chopper model paper aero planes to the basic dart, paper aero planes have become increasingly more diverse and complex. There are paper aero planes that are composed of two wings and others that are composed of several wings. The objective of this experiment was to design a gliding paper aero plane by means of using A4 paper in its construction. When the aero planes were propelled, the quantity of time that the aero plane remained aloft and the number of meters Continue reading...