Free Essays on Load to Get Inspired & Learn by Example

Abstract

The design for buildings essentially requires preliminary designs, approximate analysis and optimization to provide, strength, stability and human comfort. Beams are regarded as important items in achieving these factors. Beams bound the house skeleton together. The beam system is destined to distribute the load uniformly and provide support. They often manage to achieve uniform load distribution by transmitting the load to the posts, which are strongly supported by the foundation. This paper will clear demonstrate the design components of a beam in building.

Introduction

A beam can be defined as a structural member that extends horizontally between numbers of supports Continue reading...

Lab Report (Straі n Gauges transducer) 1

Lab Report (Straі n Gauges transducer)
<course name>
<Guі de Name>
<Unі v Name>
<Department>

Lab Report (Straі n Gauges transducer) 2

Abstract

Abі lі ties to precisely determine mechanі cal property permits for suі tableness of materі als for the
applі catі on to be determined. Thі s lab-report outlі ne uses of a straі n gauge to ascertaі n the performances of straі n
gauges to measure lі near dі splacement. The report also і llustrates straі n gauges utі lі zed to form
quarter, half and full Wheatstone brі dge. І t і s experі mentally Verі fy the theory of bendі  Continue reading...

Introduction

The process, in which the heat produced in result of fuel combustion, simultaneously produces electricity, and heat is called cogeneration and the name of the built and configured system that utilizes the heat is Combined Heat and Power Engine (CHP). The CHP usage has so many advantages in different manners, especially nowadays, that CHP systems with up to 90% efficiency and compatible to different types of fuels, including the renewable ones are produced.
Therefore using a CHP, leads to production of the desired result but by using less fuel, and in comparison to the conventional methods it saves energy Continue reading...

As an example of Physics in our daily life activities we can consider the interaction between our foot and the road when we walk. According to Newton`s third law for every action force there is an equal and opposite reaction force. (Harris, W., n.d.). Force is the pull or push needed to do a work. A force exists as a result of interaction, whenever there is an interaction between the two objects there is a force acting upon each object. When one object exerts a force on the second object, the second object also exerts an equal and Continue reading...

Introduction

One of the systems of the body is the muscular system which is has a specific function of either contracting or shortening (Seeley et al 2008). The muscular system has three types namely the skeletal, cardiac, and smooth muscle. Skeletal muscle is a type of muscle tissue that allows movement of the body. Muscle contraction is defined as the process where in muscle fibers produce tension or action potential frequency when there is an interaction among different contractile proteins or sliding of actin over myosin myofilaments which is controlled by the nervous system. Action potential frequency is defined as Continue reading...

CourseProfessorInstitutionDate

ENERGY AUDIT FOR A RESIDENTIAL HOUSE
Introduction
Energy conservation is desirable for both economic and environmental reasons. Efficient energy use reduces the energy drawn from the mains. Reduction of the power load per home means that the utility company will have to supply less power to the residential estates. The utility company in turn will undertake less carbon emitting energy production activities. Efficient energy use will reduce the carbon footprint of individual residential houses and the utility company. Reduction of toxic emissions will decelerate air pollution, which leads to global warming that causes a rise in sea levels due Continue reading...

<Author’s Name>
<Institute>

Introduction

A motorcycle suspension system helps in dual manner – support the vehicle brake and maintain the balance. This directly translates in to the bike’s safety and provides suitable comfort and balance to the rider. The function of the suspension system is to absorb the shocks while handling, breaking or while simply riding on the road. The vibrations caused while running the vehicle are ‘dampened’. Thus, the name ‘vibrations damper’ for the shock absorbers. The rear suspension, also called “rising-rate” is popularly used in motorcycle design and manufacturing. Here the wheel is suspended by Continue reading...

English

Introduction
Humans are intelligent beings. They have adopted our environment to improve our lives. As they have gained knowledge, they have continually expanded the methods to tap the environment. As a result, the energies sources they have been using have been evolving and improving from stage to stage. First, it was fire and wood then coal. Thereafter, it was gas and oil. The latest stage is nuclear energy.
Nuclear energy has a set of features that no other known source of power can compete with. Nuclear energy can easily supply high demands with low operational cost and low gas Continue reading...

This Paper was prepared for_________ taught by___________

Introduction
Mathematical skills are vital in the healthcare field, since many problems in different areas require measurements, formulae and calculations to be applied. This paper reviews two healthcare problems which suggest mathematical solutions for effective management of the patients.

Pain Management

WHO analgesic ladder (1996) supposes the patients with mild\mild –to-moderate pain receiving combination preparations of a weak opioid plus non-opioid should be transferred to strong opioids when the pain increases. The dose calculation is crucial in these cases: if it is too small, the effective pain relief will not be provided; if the opioid is overdosed, the side effects Continue reading...

INTRODUCTION

This write up gives details about implementation techniques that have been adopted by CPU manufacturers to improve the speed of information processing of CPU especially with the use of techniques as pipelining and the implementation of Reduced Instruction Set Computers (RISC) architecture. Most of the high performance computers make use of these techniques in some form. The details of the RISC architecture where fewer machine language instructions are used, and all instruction formats are kept of the same length in order to simplify the fetching and decoding process of instructions.

The history of the RISC architecture can be traced Continue reading...