Free Essays on Metal to Get Inspired & Learn by Example

based on a draft by

Executive Summary

Statistical analysis was done on the aluminum manufacturing data. Using appropriate tests, some relationships were established. First, sheet metal grade aluminum has the highest production output at sections 1 and 2. However, the standard deviation values are also highest at these two sections. Second, there is evidence that the produced amount of electrical grade aluminum is significantly different (probably higher) than the sheet metal grade aluminum made. Third, there is evidence that the bauxite consumption the bauxite consumption is significantly different (probably higher) than the purchasing policy of 4.2 tons per pot. Lastly, power Continue reading...

Metal Distribution The use of information technology has increased tremendously over the years. Today, we use technology in all areas of our lives both personal and business wise. In the distribution of metal, the use of service metal centers has become the norm in the industry. Manufacturers of metal together with the end users have chosen to focus on specific areas (Forging, n.d). The manufacturers specialize in producing metal and steel while the end users focus on designing their products leaving the rest of the work to be done at the call centers. The work done at the service Continue reading...

Abstract:

The total hip replacements are indispensable medical procedures that address the hip problems of people. The medical practice for some time has been an adequate solution for hip problems. However, problems has been discovered that the materials used for the implants that are composed of metals and alloys cause fretting corrosion which leads to various health complications and implant failure. This paper discusses the hip joint implants and the fretting corrosion that complicates the medical practice. It touches the adverse effects of the implant corrosion in the health of the patients. Furthermore, this paper divulges some of the design Continue reading...

(Professor/Instructor)

The volume production of inexpensive steel products realized by the processes alongside those of Bessemer’s has recast the world. Cost effective steel products has allowed manufacturers to design and develop a host of large and small products using steel as a base material. Inclusive of these products are ships, aircraft, buildings, forks, spoons, witches, razors, saws, and tools and utensils of every type (Spoerl 1).
The systematized and inexpensive production of steel became feasible only after the development of the Bessemer method, named after its ingenious inventor, British metallurgist Sir Henry Bessemer. Bessemer posited that the presence Continue reading...

Introduction

The paper analyzes the ethical issues involved in China’s mining of rare metals. Over the years, China has significantly been reducing its export and supply of ‘green products.’ Such products include electric products that are energy efficient. The reason for this has greatly been influenced by the Chinese Ministry of Industry and Information Technology’s policy of regulating the amount of certain rare metals that are exported. The government has further imposed complete bans on the export of other metals. China is rated as the world’s number one producer of rare metals and manufacture of products that Continue reading...

Section 1: Catalysis

Introduction
Catalysis is a process by which chemical reactions are hastened by small amounts of external substances, called catalysts. A suitable catalyst can alter the rate of a thermodynamically attainable reaction, but cannot disturb the position of thermodynamic equilibrium. Most catalysts are solids or fluids, however they may likewise be gasses. Catalysis is a cyclic process. The reactants form a chemical complex with the catalyst, subsequently opening a pathway for their conversion into the respective products, following which the catalyst is released and allows the cycle to continue. Now, catalysts do not have infinite lifetimes. As a result of Continue reading...

Paper punching

The technology in the modern world on how information is received and stored is highly revolving. However, relevant documents ought to well be saved for future reference. Experts declare that the spiral binding and demand on printing is set to experience massive expansion in the future and hence the need to explore the technology employed in the paper punching.
Paper punching is very crucial as it prepares the documents for proper archiving and hence easy retrieval in the future. There are several factors that affect the quality of a paper punch. In order for one to produce a good Continue reading...

Research Paper

In my opinion, the three bands or solo artists who have had the most impact in rock and roll history are The Beatles, Aero Smith, and Def Leppard. This opinion is based on their influence n later generations of artists. Without these artists, the music industry as we know it today would have been different.

The Beatles was an English rock band formed in 1960 in the city of Liverpool. The band was made up of four members, John Lennon, Paul McCartney, George Harrison, and Ringo Star. The band is considered as the most successful act of the rock Continue reading...

Assignment 2: External and Internal Environments

Introduction
General marketing environment of the company is composed of micro-and macro-environments. Microenvironment (internal environment) is presented by forces directly related to the firm itself and its ability to service customers, i.e. suppliers, marketing intermediaries, customers, competitors and contact audiences. Macroenvironment (external environment) is represented by forces of the wider social plan, which affect the microenvironment (demographic, economic, ecological, technological, political, and socio-cultural factors).
As any organization is located and operated in the environment, it is highly under the impact of external and internal environments. Founded by Charles Martin Hall Alcoa Inc., occupying the third position among the largest Continue reading...

At the beginning of the eighties, major companies that necessitated packaging for their products saw the advantage of using aluminum instead of steel as cans, because aluminum was much lighter, reducing the transportation and the production costs (Bradley, 2011). The can industry shaped around this trend, with many companies activating in this field reorganizing and diversifying their businesses. For Crown Cork & Seal (CC&S), the advent of aluminum in the metal packaging industry represented an opportunity to produce major changes, which allowed the company to continue existing.
As CC&S was confronting the bankruptcy, John F. Connelly stepped in and changed Continue reading...