Free Essay On How To Change Oil On A Car
A car needs regular maintenance of which oil change is the utmost basic. Changing car oil is a simple practice that need not necessarily be done in the garage as it is easy to do from home.
First, ensure that you have the tools or equipment needed for the job. This will enable you do the work fast and correctly. For example you need a new filter, a container over which to collect the runoff oil which you may decide to recycle, a wrench for the removal of the used filter oil, the correct oil for replacement, funnel, wrench, a safe and safe sets of blocks or ramps for obtaining the car from beneath.
Second, once every tool need is ready warm the car by letting its engines run for 10 to 15 minutes before shutting the engine down. This puts the car in the proper mood for the eventual oil change and helps the sludge to flow out of the engine easier.
Third, raise the car effectively in order to attain easier access making sure that the brakes are properly set in place for security purposes. Then the oil is removing by placing a container such as a pan beneath the drain plug. The bolt to the draining plug is then loosed using a standard wrench then removing the cap screw. Training should take around ten minutes. Now , return the pan back and replace the plug bolt back.
Fourth, have the hood opened to get the filter. This is usually a coke bottle size object normally placed under the hood though in some car models it can be located underneath the car. Once you find it, loosen its fastenings using the appropriate size of the filter wrench then have it removed. This is important in order to avoid dripping the oil but must be done with great care. The old oil filter can then be replaced with a new one. However, before placing it, one needs to rub that new filter’s seal with some little oil using one of their hands before tightening the new oil filter into place using a filter wrench. However, do not use much force over this fastening.
Once all this is over, one must refill the oil again. To do this , get the oil cap beneath the hood of the car and using the endorsed weight, as well as the recommended quantity of oil for the car model After replacing the cap, wait for some few minutes then the oil tank in order to ensure that the oil lever falls between low mark and full tank marks tank; the best way to ensure this if to use the deep stick.
Before using the deep stick, make sure that the stick is wiped clean using a clean material such as a clean piece of cloth. This ensures that the rod does not introduce foreign bodies into the oil tank as well as serves to ensure that the oil mark on the wiped stick is representative of the correct amount of oil in the tank.
Please remember that this paper is open-access and other students can use it too.
If you need an original paper created exclusively for you, hire one of our brilliant writers!
- Paper Writer
- Write My Paper For Me
- Paper Writing Help
- Buy A Research Paper
- Cheap Research Papers For Sale
- Pay For A Research Paper
- College Essay Writing Services
- College Essays For Sale
- Write My College Essay
- Pay For An Essay
- Research Paper Editor
- Do My Homework For Me
- Buy College Essays
- Do My Essay For Me
- Write My Essay For Me
- Cheap Essay Writer
- Argumentative Essay Writer
- Buy An Essay
- Essay Writing Help
- College Essay Writing Help
- Custom Essay Writing
- Case Study Writing Services
- Case Study Writing Help
- Essay Writing Service