Design Reports Samples That Help You Write Better, Faster & with Gusto

Report writing for the re-development project

Introduction 3
Objective 4

Recommendation 7

References .8

Executive Summary
Project title is: The Craigmount Community Park.
The foundation of the assignment is: the redevelopment of the Craigmount Community Centre to a local community park.
Purpose of the assignment is: to offer local community a place to enable a diverse community involvement and interaction through delivery of a prestigious community sports hub facility and a new state of the art development including leisure, health, education and lifelong learning facilities to increase the health and well‐being of the local community.
Financing sources are: initiator’s funds, bank loan, sale in advance.
Continue reading...

Chapter 1

In the year 1957, a new writing font was introduced to the globe. This particular font was developed in Switzerland in a foundry known as Haas. It would later go on to become one of the most popular and recognizable typefaces across the globe (Hustwit et al., 2007). The particular font being referenced is Helevetica. During its 50th anniversary in 2007, a feature length documentary film on the font was released. This documentary explored the history of this typeface and how it had evolved and thrived throughout the years as well as its role in the current art culture.
Continue reading...

<Author’s Name>
<Institute>

Introduction

A motorcycle suspension system helps in dual manner – support the vehicle brake and maintain the balance. This directly translates in to the bike’s safety and provides suitable comfort and balance to the rider. The function of the suspension system is to absorb the shocks while handling, breaking or while simply riding on the road. The vibrations caused while running the vehicle are ‘dampened’. Thus, the name ‘vibrations damper’ for the shock absorbers. The rear suspension, also called “rising-rate” is popularly used in motorcycle design and manufacturing. Here the wheel is suspended by Continue reading...

<Prof Name>
<Course >

Integrated Firefighting Helmet

KEYWORDS

OBJECTIVE
The object of this paper is to ascertain the safety standards of the firefighting helmets. Specifically, this paper attempts to determine if there are any upper limits to the weight of the helmets. The research will be directed to determine if there is any optimal distribution recommended for the mass of the firefighting helmets. The fabrication process will be examined which support such standards which are recommended for the safety and security of firefighting personnel.

Research Questions

Precisely, this research is conducted to determine the strengths of the firefighting helmets and the impact Continue reading...

Part One:

Business operations depend on a number of diversified activities. Ideally, it is the overall operation of these activities that determine the success or otherwise of the organization. In this paper, focus is placed on critical component operations that in total determine the outcome of businesses. The paper specifically focuses on AT &T as a telecommunications company. Operations management largely involves a number of processes that go into the production of the final product. In the organizational setup today, work is organized into departments with related sets of tasks. The operations department mainly handles the logistics, production and quality assurance. Continue reading...

Objective

The aim is to have a robot design that would be used in the detection of fire existence. It will be a useful system that will be instrumental in detecting fire breaks and having strategies to put off the fires in advance. The aim of the research is to have a fire robot that would be multi-sensor and would be useful in fighting fire in every-day life. In the design, the firefighting robot will make use of flame detectors. The firefighting methods and procedures will be programmed with the use of sensor-based methods and procedures. There are thermistors/flame sensors Continue reading...

Information system

(Course No.)
(City & State)

Introduction

This paper provides an overview of a database and user interface design process for an information system. The first section will provide an overview of what an information system is required to do and propose the design and development process. The information system is based on a car management company. It is proposed that the company y will benefit immensely from the services of an information system. The second part of the paper will detail the design of the user interface based on the principles of human computer interaction s design. The third part of Continue reading...

of

Advertising Creative: Strategy, Copy, and Design

Chapter 1: Copy, Design, and Creativity: The Nature of Our Business
Chapter one introduces the concept of the ‘creativity revolution’ and creativity in the business of design.
Creativity is an innate attribute that cannot be taught and while. Creative abilities vary by person and regardless of the advertising career path one chooses, it is important to have at least a basic understanding of creative strategy. For example, graphic artists and art directors’ roles are more ‘hands on’ or design based so they have a responsibility to ensure that graphical/visual output is in line with creative strategy. On the Continue reading...

Ethical Issues in Design of the Phone

Ethics have been described as that which involves moral aspects of human behavior. Ethics is concerned about how people make judgments regarding approvals and disapprovals, opinions of whether something is right or wrong, and judgment of whether a certain behavior, affair, object, or state is bad or good (George, 2005; Harris, Pritchard & Rabins, 2009). Ethics is broad. However, in the context of engineering design of a phone, ethical issues that shall have to be observed include designing of a phone that shall be considered good in totality. It shall involve design of a phone that has minimum environmental impact Continue reading...

Defining the problem

An organization’s workspace influences the performance of the workforce. Every organization provides an office environment to its workforce so that they can perform their assigned roles and duties. The workspace is very significant and influences the operations of an organization. The design of an office influences the psychological and behavioral outcomes, for example, motivation in the workplace, job satisfaction, and interaction patterns (Henderson, 2014). In recent times, most organizations have realized that poor design of a shared office affects the performance of the workforce as it becomes difficult for them to meet the expected standards at the workplace. Continue reading...

Completion Date

CONTENTS
1. Introduction... 3
2. Methodology ..... 5
3. Discussion...... 5
4. Findings......... 8
5. Conclusion..10
6. Recommendations11
References ..... 13
Strategic Innovation
1. INTRODUCTION
Success in present, global market conditions require much more agility and responsiveness to client needs. As organizational structures of global companies respond more swiftly to market conditions and client needs, conventional management practices become not only irrelevant but also constitute serious challenges to any strategic advantage a company could attain in a highly competitive market (Baden-Fuller, 2005). Further, a significant feature in organizational structure is emerging in company management which has redefined how internal Continue reading...

System Circuit Analysis and Design an Integrated Operation Amplifier

Introduction
The amazing device called operational amplifier (op-amp) is a solid state IC which has the abilities to use external feedback to control its operations. As one of the most versatile device in the state-of-art solid state electronics technology till date, op-amp has been used with several different and remarkable functions. Apart from its use as a high gain amplifier, it has been typically used to device analog computers, various amplification requirements where high gain is required, cmos, short circuit protection, low input current frequency compensation and a myriad of different functionalities.
Equally interesting has been the evolution of Continue reading...

Introduction

The quantifiable data represented in Table 20 provides the general marketing matter of the family of four, which can be used by the National Marketing Council (NMC) members and also for economic consideration. The data represents the pattern of the consumption that is anticipated to help the NMC members learn about the market trends. The information from the table will cover various industries and influence their production planning as well as promoting the sale of goods and services. The population expenditure from the table includes food, tobacco and liquor, Housing, clothing, persona care, recreation, reading, education, transportation, and other Continue reading...

Summarize the various forms of loss, which did occur as well as were likely to have occurred as a result of the event.
After reviewing the report entitled “The Capsize of the ‘Herald of the Free Enterprise’”, the various forms of loss, which occurred, as well as were likely to have occurred as a result of the event are as follows: (1) loss of lives of people; (2) loss of properties (those owned by the passengers, employees, management, as well as the assets of the Herald; (3) loss of reputation (negative image to the company, Townsend Car Ferries Ltd.; ( Continue reading...

Introduction:

In most system designs, the primary focus is usually on business goals and delivering fancy features using cutting edge technologies. However, these system design approaches ignore an essential stakeholder – the end user. User-Centric Design (UCD) refers to the process of creating a tool such as an application interface or website from the perspective of how it will be viewed by the human user. This design paradigm does not require users to adapt their habits in order to use the system but rather focuses on adapting the system to the users’ needs, beliefs, attitudes and behaviors as they interact with Continue reading...

Business Management and Decision-Making Process

Executive summary
The paper is based on analysis of business management and decision making processes of two garment companies i.e. Next Store and New Look. The paper starts with brief introduction in which various issues of the garment industry are presented. The paper proceeds to presenting brief overview of both the companies. A comparison of SWOT analysis of both the companies is also presented in the paper. The paper also discusses about the leadership styles of both the companies while stating issues faced by the companies due to these leadership styles. The paper proceeds to defining the type of Continue reading...

A Critique of Favaro et al. (2005)

Eating disorder prevention is still a controversial issue, as some researchers argue whether or not existing prevention methods are actually effective, or even counterproductive.
Subsequently, the authors deal with the research question of whether or not psychoeducational eating disorder preventive interventions run by teachers with specialized training are effective at preventing eating disorders. With the citing of existing literature, the research problem and question are sensibly stated and introduced into the body of the study. While not explicitly stated, the authors’ hypothesis would seem to be that trained psychoeducational eating disorder preventive Continue reading...

Executive Summary 3

Introduction 3

Outside drivers of change and change agents 8
Functional and dysfunctional effects of organizational culture 8
Mechanistic or organic organizational design 10
Effect of reduced autonomy of workers on job satisfaction 11
Recommendation 11
Conclusion 11

Bibliography 13

Executive Summary
This paper is about organizational behavior. The paper attempts a discussion of what organizational behavior is and what are the implications and the dynamics of organizational behavior. To analyze organizational behavior, this paper uses a case study “Health or Safety in the Workplace.” The case study is about implementation of a safety policy in a workplace, the reaction of Continue reading...

1.0 Executive summary
The paper analyzes and evaluates the strategies and marketing environment of Haigh's company. It forms a basis of the company's vision of becoming the most successful and the top provider of chocolate in the entire country. The marketing strategies adopted by Haigh's group are correlated with other companies that comprise the major competitors in the chocolate market. This paper focuses on the long lasting strategies incorporated in the practices that are performed by Haigh; importantly they work to maintain an environmental friendly company. The company has established a unique approach towards attraction of their customers. Starting Continue reading...

Abstract

Reciprocating compressors are pumps that force gasses into a limited and confined space thereby converting electric or chemical energy into potential energy by raising pressures. Reciprocating compressors are some of the most important equipment in many industrial setups. Large and critical industries such as gas pipelines, petroleum refineries, and petrochemical industries heavily depend on compressors. Poor compressor performance or faults could lead to high losses if operations stall or slow down due to inefficient compressor operation. Therefore, compressor selection, operation and maintenance are very important aspects of plant design and operation.

Introduction

A gas compressor system adds potential energy to Continue reading...

Virtual Reality Technology In Arts & Media

<Author>
<Course>

Introduction

Virtual reality is a comparatively new concept in the technology industry as the application of this concept is still experimental and limited to only certain industries. The concept of VR has been attractive for scientists as it is believed to provide a unique experience in a virtual world with its own norms and standard giving an opportunity to do something that can hardly be possible in real world. The idea of VR is based on the initial concept introduced by Ivan Sutherland to define immersive simulation, he presented the screen of any device as the Continue reading...

Introduction

Entity Relationship modeling is a significant aspect of database modeling. There are many aspects that have been added in the management and modeling of databases the world over. There is need to have critical assessment of the database before it has been implemented. Database design is a critical process when working on database management systems. The reason is that databases form a significant part of the data management aspect of an organization. Entity Relationship modeling has been part of the design process of the database design process. Entity relationship diagrams help to show the relationships between the objects that Continue reading...

Product or Process Selected

The product selected in this assignment is the car tires. Michelin is one of the world’s leading tire manufacturing company along with Bridgestone and MRF as their competitors. Their objective is to contribute in the advancement of mobility by making ground breaking innovations keeping in mind the respect of their foundation morals, customers and most importantly environment.

Brief description of the scope of product or process

The scope of the paper is to look at some of the practices associated with sustainability concerning the company’s practices within the market. Nowadays, the things that are happening across the globe in terms of consumer goods and production into Continue reading...

Orbital Considerations

ELEC 4504 Avionics Technical Report
Assignment #1
1.0 Introduction
The purpose of this report is to investigate how spacecrafts determine their location. The two main parameters required to obtain a spacecraft’s position are its orbit and its attitude, this report will focus more on orbit determination. An objects attitude is a measurement of the object’s position measured relative to a designated object or an inertial reference, attitude motion measures the objects rotational motion about its mass centre. The orbit of an object can be described as the curved path it follows around a point in space due Continue reading...

The main focus for last term was to finalize my initial design and modelling of my project. Previous work was just preliminary and there was a need for further update, evaluation, simulation and finally construction of the pilot scale. This involved drawing of the detailed designs and layouts of the assembly using solidworks and also to finally perform simulations using a software called UniSim. UniSim was chosen because of its simplicity. Previously, I had encountered challenges while trying to use solidworks to draw the VMD system. However, this term, I overcame the challenges I had encountered previously. A number Continue reading...

The design engineers can use Minitab to obtain useful statistic information about a material. ZMD, a commercial aircraft company-manufacturing aerospace, provided some design specifications for a particular bolt. The specifications defined by the Aircraft series 900 for ZMD is a tensile strength of 17.4kN. The requirement for the supplier parts by the Quality and the Manufacturing department is the conformation to a performance level of 99 percent with respect to the specifications of each part. Descriptive statistics incorporated into probability plot aided in the testing of the data.
The statistic results portrayed a population of 18.324 KN with a Continue reading...

Executive Summary

The research object of this marketing plan is the Ashmolean Museum, a time-honored museum for art and archaeology. A situational audit is done by using the SWOT analysis. Some of its strengths that are discussed throughout the paper are its website, location, transportation, and catering services. In comparison, some of its weaknesses include sanitary environment, quality of additional exhibitions, and internet marketing. The opportunities of the Ashmolean Museum include the increase of foreign tourists, balance of elitism and populism, and freedom in exhibition themes and forms. Along with opportunity there usually tends to be some threats, and some of Continue reading...

Advance customer experience at Dubai Industrial City

3.0 Methodology
This chapter describes the research methodology and the selection of the samples during the study. The methodology chapter describes the procedures that were used in the collection of data and the instrumentation design. Additionally, the chapter offers statistical procedures that were used to interpret and analyze the data. This study used the online survey methodology, and a total of eleven questions were used to assess the total customer experience at Dubai Industrial City. One question was open-ended, and the questions assessed the extent of customer satisfaction and customer loyalty. Four questions focused on the innovative business approach, Continue reading...

In Partial Fulfilment of the Requirements in

Executive Summary 3
Introduction 5
Importance of Strategic Communication in Change Management 6
Change Management Communication Strategy 9
Conclusion 11

Bibliography 12

Executive Summary
Dapple is one of the most successful companies in the technology industry as the company was able to gain a significant market share in the global market following the strong sales of its smartphone and tablet computer products. Prior to introducing its smartphone and tablet computers, Dapple initially sold media players. Dapple’s smartphone and tablet computers, however, drew the market’s attention from individual media players. Consumers in the global market either purchase a smartphone or Continue reading...

Introduction

Organizational structure is among the concepts that explain and predict the causes and forms of behavior that people exhibit in organizations. Organizational structure is an intrinsic factor that influences behavior externally. It influences behavior through coordination, units, distribution of authority and division of labor. Structure refers to a pattern of actions and interactions that influence the actions of members of an organization. The structural perspective on organizations involves exploring the influence of structure on organizational performance. Structure influences organizational performance in various ways and the success of an organization depends on its structure.

Wright's Architectural Dictum

Frank Lloyd Wright once stated that Continue reading...

Introduction

As opposed to continuous time capacitor circuits in analog signal processing, Switched Capacitor (SC) circuits find wide range of applications in discrete time signal processing. These circuits function by charging and discharging capacitors with the help of switches to provide flow of charge in desired direction. SC filters are embedded in integrated circuits due to their inherent temperature and voltage characteristics.

A typical SC circuit is equivalent to a discrete time resistance. Consider a simple example of a SC circuit:

Clock pulses are applied on switches to perform transition between two voltage sources shown in the figure. It is made sure that the clock pulses don’t overlap so that the voltage sources are not short circuited. It Continue reading...

The Capilano Suspension Bridge was built in 1889 across the Capilano River by a Scottish engineer named George Grant Mackay in the city of Vancouver. The bridge was initially constructed from hemp ropes and cedar planks, which were later replaced with more durable steel cables in 1903. Over time, the bridge has exchanged ownership several times and has undergone a series of renovations. This is a paper on the Capilano Bridge. Special focus is given to its history, construction, and impact in its locality.

History of the Capilano Suspended Bridge

George Grant Mackay arrived in Vancouver in 1887 and bought 6000 acres from Britain in Continue reading...

 INTRODUCTION ON THE STATISTIC ANALYSIS:

The first attempts to build an airplane were made in the XIX century; in particular, aeronautic shell (aircraft) was built in full size in 1882, by Russian engineer Mozhaysky. However, his design was not able to rise into the air. The reasons for this were: weight was too big and the law abilities of the engines of that time (steam engines), the lack of theory of flight and the lack of engineering experience in many aviation pioneers.
The first aircraft, which could alone get off the ground and make a controlled level flight, became the "Flyer 1", built by Continue reading...

Financial markets and institutions

Introduction
In economics, there is one assumption which is considered when analysing markets. This is the assumption that the market has perfect information. However, this is not always the case. Most markets do not have perfect information because it is impossible for consumers to have all information regarding transactions. Since perfect information is not possible in real world, economists have other means of studying markets with imperfect information. This study is known as information asymmetry. Information asymmetry arises when one person has less information concerning a transaction. The study of information asymmetry gives rise to “market for lemons” where Continue reading...

Introduction

Brand switching is the process of making choice of a same product or brand other than from the one that was previously used in routine. It is common that customers switch from one product or brand to another similar kind of other product; however, when it happens, the likely behavior of brand switching picture is built. If the propensity of customers to switch to other brands is known then it is easier to model the future relative positioning and market shares of competing brands. Customers evaluate any product or brand based on its attributes and compare them with the Continue reading...

Impact Statement

Summary
Molinari’s article focuses on changes made by engineers in the environment. The article demonstrated how Engineers play a significant role in the society when it comes to solving problems affecting people in the community. The author claimed that daily challenges faced by people made engineers come up with excellent solutions. In the article, Engineering students seek ways of providing an adequate supply of water to the growing population. Additionally, they brainstorm on how natural methods could be used to get rid of toxic pollutants in harbors without causing any harm to animals living in the water. Finally, Continue reading...

Abstract

The Design and operation of reclaim systems for large stockpiles need proper designing to ensure that the companies deliver high-quality products to the customers. Additionally, the machines make work easier by performing tasks that could turn out strenuous to the workers. However, the large stockpiles require proper handling to avoid breakages and damages that could lead to massive financial losses. For this reason, the engineers designed the systems that would enable the handling of the stockpiles for efficacy purposes. On the other hand, the stockpile and the reclaim conveyors are found in different industries. they range from the mining Continue reading...

Introduction

The lifestyle apparel and skating industry is highly competitive and it calls for the entrance of new products and services every other day. The surfing product will be introduced under a chain of stores called The Hype. The chains’ headquarters is in San Jose around the de Monsul Beach as the target customers are more likely to look for the product from nearby stores. The main aim of the chain is to introduce new surfing wear to the Californian community as various surveys conducted in the area showed that there is lack of large scale supply and production of Continue reading...

COMPANY OVERVIEW

Apple Inc., an American multinational organization, located in the middle of the Silicon Valley focuses on the designing and development of the personal computers, software as well as electronic products like the MP3 players and iPods. The main products by Apple Inc. are iMac, iPhone, iPod and iPad while it is revolutionizing the iPhone since its creation. Steve Jobs and Stephen Wozniak established Apple Inc. in Cupertino, California on April 1, 1976 (Elliot, 2012). The company operates in more than 317 retail stores that are located in 10 countries around the globe. The products of company are sold throughout Continue reading...

1. Summary of various forms of loss, which did occur as well as were likely to have occurred as a result of the event.
Every organization aims to avoid generating a loss; whether it is financial loss, work-related injuries or fatalities, damage to the company image, or actions that negatively impact the environment. In the report on Herald of Free Enterprise where the ship capsized after a little less than 30 minutes from sailing from Number 12 berth at Zeebrugge, Belgium, the various forms of loss that were sustained (and could have been sustained) from the accident are summarized Continue reading...

Referring to the latest annual report for the year 2014, the financial standing of the company is not very much appreciable with losses magnifying and liquidity crashing. As for the net profit margin of the company which was recorded at -3.68% in 2013, the condition got worst with losses proliferating to -9.19%. Similar trend was witnessed in the liquidity position of the company as the current ratio of the company went down from 1.88 to 1.52 while the acid ratio decreased from 1.33 to 1.01. In addition to the above financial attributes, what was most shocking for us was Continue reading...

Report

Executive Summary
The research is dedicated to development and design of an iphone application devoted to tracking nutrition intake. The experimental part of this research was devoted to asking people specific questions related to their diets and nutrition. They were also asked about their interest in using the app on nutrition intake and specific features that it can have. The results have shown that people are interested in the app and want to make their diet healthier, which means that there is already high demand for such an application and it is a good idea to develop it.

Who Continue reading...

The aim of this research was to find out the effects of the Self-intermittent catheterisation (SIMC) on the quality of life and on the behavior of the patients. The research found out that SIMC had huge impact on the life of the eight men. SIMC affected their self esteem, sleep, social life and personal life (Bakes, 2008). Thus, the nature of the research is social science since it is looking at describing the experience, behavior and consciousness of the eight patients (men) who empty their bladder through Self-intermittent catheterisation (SIMC). It is not easy to calculate, quantify or weigh Continue reading...

An Assignment Submitted by

Healthcare Partners, Inc.
Company Background
Healthcare Partners, Inc. is regarded to be a division of DaVita Healthcare Partners, Inc.; it is focused on offering information, various services as well as new technologies within the healthcare area. Currently, Healthcare Partners enlists approximately10 thousand people nationwide. Speaking about the diversity of intangible products, it is worth saying say that Healthcare Partners regularly deals with supplies of marketing information, collection of healthcare data, de-identified instructions of medical practitioners, medical cases, numerous EMRs, and social media. As for the competitors, it is possible to name such as Kantar Group, Nielsen Company, and GFK Continue reading...

Essence, Australia is one of the most famous design house for wedding gowns. It is known for its attention to details that sets it apart from other designers. It is known for its use of luxurious fabric and exquisite beading. The design house offers different wedding dresses ranging from Angel Satin to Satin Chiffon. Our company, Allure wedding house, is looking to expand and carry different international designs. Essence would be a great place to start. It will not only provide the company with an experience of international markets, but we can also work with them to distribute some Continue reading...

Apple, Inc. (Apple) is involved in the design, manufacture and marketing of media devices, mobile communication devices, portable digital music players, personal computers, networking solutions, software products (including operating systems) and accessories as well as third party products. Apple also distributes digital applications and content through its app and iTunes, iBook and Mac App stores as well as through third party resellers. With upwards of $182,795 million, $52,503 million, and $39,510 million in 2014 revenues, operating profit and net profit respectively, Apple is easily one of the biggest and most profitable companies in the world. In Continue reading...

Executive Summary

Diesel is involved in the design, manufacture and distribution of kids’ clothes and sportswear, eyewear, earphones, fragrances (Fuel for Life and Only the Brave), footwear, furniture, leather goods, jewellery and watches. This report explores the opportunities and difficulties that exist in the market to introduce a new brand of condoms, on the back of the Diesel brand (Yahoo Finance, 2014; Diesel, 2015). It aims include:

Determining Diesel Jeans’ winning formula and the reasons why previous extensions have been very successful

Determine Diesel’s brand values and recognition
Assessing the nature of the competition in the condom and contraceptives industry
Find out ways in which Diesel condoms can fit into the Diesel brand and the Continue reading...

for an Manufacturing Plant

Energy Policy: UK

1. Energy Policy & Economic Energy Strategy for an Organisation
1.0 Introduction
The company wants to evaluate the potential of using Combined Heat and Power (CHP) and Photo Voltaic (PVT) for energy and for selling in the future. Manufacturing is a highly competitive enterprise and even small changes in cost savings are helpful. Cost savings is one reason and the impetus to become environmentally responsible and sustainable is a second reason. The pressure to integrate alternative energies is very high right now due to new regulations at all levels; locally, nationally, and internationally. On the positive Continue reading...

Introduction

In today’s world, data mining is a significant business process that is used to get valuable and important information. This paper will focus on technical part of a business plan that is aimed at ensuring that there is data warehousing component in the data warehousing process.

Technology overview introduction

The datawarehouse can be taien and commercialized to act as a business. Business information systems are currently used widely in every industry to store information and data for future use. Data mining and data warehouse are the common processes found in information technology. The term data warehousing has dominated much energy and Continue reading...

Informal Report

Currently, consumers are seeking solutions that will let them maximize their income dollar and spend their money on the things that they value in life. The purchasing pattern is influenced by the desire to live a happy life, and enjoy the leisure time. Due to the changing lifestyles, consumers are spending most of their finances in housing, and food. Despite consumers allocating most of their funds in food, it remains unclear if they are fully satisfied by their meals. Moreover, most funds are used to cater for housing, and pay mortgages making it difficult for consumers to live within Continue reading...

<Course>

Introduction

The Empire State Building serves as one of the most significant architectural icons in New York City, New York. Standing out as among those in the pinnacle of Art Deco design, the Empire State Building continues to attract and impress visitors to New York City every day and has become an indispensable component of the city’s vast skyline. Although the Empire State Building has since been surpassed by many other skyscrapers in terms of height, it holds a distinct iconic status that has also come to symbolize New York City and perhaps the rest of the Continue reading...

BROMWICH

LEISURE
CENTER
Introduction
Sports and leisure are personal recreational activities that enriches the peace of the soul and helps to keep mind and body fit and sound. West Bromwich Leisure Centre provides world class facilities for sports and leisure so that people may spend time with their body to replenish it with energy. It is run by Places for People Leisure which was formally known as DC Leisure. The leisure center has various facilities including swimming pool, gym area, sauna bath, steam room, children’s special room, dance studios, skating ring, a spacious cafeteria, a four court well equipped Continue reading...

Introduction

Zara is a Spanish owned fashion brand that has expanded throughout Europe and beyond. Zara is retail fashion brand that concerns itself with the provision of trendy brands of attires that target high-traffic shops, within which they are sold. Zara targets young consumers and the fashion trends change quickly and it focuses on selling high volumes of its products. Zara makes an average sale of £5.6 billion each year and this is expected to increase as the brand undertakes further expansions into new markets like China and the Middle East.
The purpose of this report is to examine elements Continue reading...

Summary

This paper is a compilation of three articles reporting the stories of three firms that are dealing with change in their external business environment. Quick action, or the lack of it, decides the fate of businesses in such changing times. The first case refers to the acquisition of the Canadian coffee chain Tim Hortons by the American giant Burger King, and the following layoffs of 350 Canadian employees. This cross-border merger posed serious threats to the newly formed restaurant as consumers on both sides of the border are unhappy with this collaboration, given the history of undue American dominance Continue reading...

Introduction

This report is especially prepared to present the digital marketing-audit of KFC around the globe. It is important to mention that KFC is basically a renowned for his chain restaurant business in fast food category that specializes in preparing fried chicken. The company is headquartered in Louisville, Kentucky in the United States of America. The most noticeable fact about KFC is that the company is placed second in the chain restaurant industry after McDonald’s. KFC has 18875 outlets in more than 118 countries all around the globe as data has suggested as 2013. The company is having a Continue reading...

CourseProfessorInstitutionDate

ENERGY AUDIT FOR A RESIDENTIAL HOUSE
Introduction
Energy conservation is desirable for both economic and environmental reasons. Efficient energy use reduces the energy drawn from the mains. Reduction of the power load per home means that the utility company will have to supply less power to the residential estates. The utility company in turn will undertake less carbon emitting energy production activities. Efficient energy use will reduce the carbon footprint of individual residential houses and the utility company. Reduction of toxic emissions will decelerate air pollution, which leads to global warming that causes a rise in sea levels due Continue reading...

Introduction3

Analysis of External Environment.3
PESTEL Analysis3
Porter’s Five Forces4
Pentagonal Analysis4
Industrial Life Cycle..5

Strategic Group Analysis5

Scenario Analysis..6
Analysis of Resources and Competences..7
VRIO Analysis...7
Porter’s Value Chain..7
Virtual Chain..8
Generic Strategies..8

Generation and Evaluation of Strategic Options.9

SWOT Analysis..9

TOWS Matrix10

Ansoff Matrix11
SAF Criteria11
Final Recommendations for H&M12

Appendix 13

Introduction
H&M Group, which includes H&M, COS, Monki, Weekday, Cheap Monday, and & Other Stories, provides fashion products. The first store opened in Sweden under the name of Hennes women’s clothing store in 1947 (Harvey, 2013). Today, H&M has almost 3500 stores in 55 markets across the globe, in addition to an online shopping experience (H&M, 2015). Continue reading...

Introduction:

Agent (A) is forensic technician with the forensic team in crime central Tallahassee; she has been with the team for 25 years. Who collects different types of evidence that a crime scene investigators looks for when observing and processing a crime scene that can be used later for further investigations and court proceedings. There are testimonies that can be collected from any witnesses, items that are gathered at the crime scene which are considered physical evidence, biological evidence like fingerprints and trace evidence which may be small but could be very important for the process of figuring out what Continue reading...

Introduction

Advancement in the technology and increasing the ways of information are some of the major aspects that used by the organizations to enhance the level of effectiveness within their operations. Shareholders deem very important for the sake of an organization, and they are the regular participants that contributes positively in their financial and economic position (Differencebetween.net, 2015).
The shareholders of the company usually divided into two different parts known as internal shareholders and external shareholders. Internal shareholders are the type of shareholders that specifically associated with the employees and the upper management of a company (Phillips, 2014). On the Continue reading...

Introductory Remarks

The word Information technology is made up with two different concepts, information and technology. It means to have sufficient information to have the technological aspects within the powers particularly. Currently, every organization of the world is now focusing over the establishment of strong significance in its technological prosperity and advancement. The thing which is common among an economically advance company of the world and weaker company of the world is their attitude towards the functionality of technology (About.com Tech, 2015).
There are certain shareholders that specifically associated with an organization, and customer orientation is very important aspect which usually Continue reading...